A sessão de perguntas e respostas de hoje nos é oferecida por cortesia do SuperUser, uma subdivisão do Stack Exchange, um agrupamento de sites de perguntas e respostas conduzido pela comunidade.
A questão
SuperUser reader user1152285 quer saber como adicionar dispositivos inseguros com segurança a uma rede doméstica:
I have a few Internet connected devices that I do not trust as being secure, but would like to use anyway (a smart television and some off-the-shelf home automation devices). I do not want to have them on the same network as my computers.
My current solution is to plug my cable modem into a switch and connect two wireless routers to the switch. My computers connect to the first router while everything else connects to the second one. Is this enough to completely isolate my computers from everything else?
I am also curious if there is a simpler solution using a single router that would effectively do the same thing? I have the following routers, both with DD-WRT:
- Netgear WNDR3700-v3
- Linksys WRT54G-v3
Except for a single computer on the first network, all of my other devices (secure and insecure) connect wirelessly.
Como você adiciona dispositivos inseguros com segurança a uma rede doméstica?
A resposta
O contribuidor do SuperUser, Anirudh Malhotra, tem a resposta para nós:
Your current solution is ok, but it will increase one switching hop plus the configuration overhead. You can achieve this with just one router by doing the following:
- Configure two VLANs, then connect trusted hosts to one VLAN and untrusted hosts to another.
- Configure your iptables to not allow trusted to non-trusted traffic (and vice-versa).
Hope this helps!
Tem algo a acrescentar à explicação? Som desligado nos comentários. Quer ler mais respostas de outros usuários do Stack Exchange com experiência em tecnologia? Confira o tópico de discussão completo aqui.
Crédito de imagem: andybutkaj (Flickr)
